Drylok 00542 Powder Waterproofer, White, Powder, 35 lb, Pail

DRYLOK® powdered masonry waterproofer is formulated to fill and seal porous masonry walls against water, even under pressure, by becoming an actual part of the original surface. An aggregate type material, DRYLOK® powdered masonry waterproofer is ideal as a base coat, as well as a finish coat.

Made of portland cement quartz calcium hydroxide titanium dioxide calcium stearate with a white finish, with applicable materials Alkyd Latex, application method Brush Roller Spray, application temperature 50 deg F.

Application

For above and below grade masonry walls, basements, brick, brick walls, cinder and cement blocks, concrete, including retaining walls, inside/outside or on any surface consisting of stucco

• Withstands 10 lb of hydrostatic pressure (PSI), equivalent to a wall of water 22 ft high
• Low-odor formula complies with all current VOC requirements
• Breathable film will not trap moisture in the masonry
• Easy cleanup with warm, soapy water
• Superior efflorescence (salt deposits) resistance
• Reduces radon penetration
• A powder that mixes with water
• After 24 hrs, DRYLOK® powdered masonry waterproofer will accept a decorative topcoat using a good quality latex paint