UGL DRYLOK EXTREME Series 28613 Masonry Waterproofer, White, Liquid, 1 gal Pail

latex base Drylok® extreme masonry waterproofer is the next generation in waterproof coatings. Features flexible encapsulated polymers which squeeze into the masonry for the ultimate in waterproof protection. Specially formulated to resist mildew growth on the dry paint film with the incorporation of an environmentally-friendly green biocide. Fully transferable 15 years warranty. Tested to ASTM D-7088 Resistance to hydrostatic pressure at 15 psi and ASTM D6904 resistance to wind driven rain. Reduces Radon gas penetration.

Made of titanium dioxide diethylene glycol monomethyl ether 2-propanol 1- (2-butoxy-1-methylethoxy) propanol oxybis dibenzoate with a white finish, with applicable materials Acrylic Cement PVC, application method Brush Roller Spray, application temperature 50 deg F.

Application

For above and below grade masonry walls, basements, brick, brick walls, cinder and cement blocks, concrete, including retaining walls, inside/outside or on any surface consisting of stucco

• Guaranteed to stop water
• Helps protect against radon gas penetration by reducing vapor transfer
• Low odor formula complies with all current VOC requirements
• Breathable film will not trap moisture in the masonry
• Easy clean-up with warm, soapy water
• Tintable, bright white, smooth finish formula features flexible encapsulated polymers for the ultimate in waterproof protection
• Incorporation of a green biocide helps the dry paint film resist mildew growth
• No pre-mixing or pre-wetting
• After 24 hr, Drylok® will accept a decorative topcoat using a good quality latex paint

Warranty

15 Years