Multinautic 14107 Dock Float, 48 in L, 24 in W, 12 in H, Polyethylene, Black

Multinautic, allows you to build your dock like a professional with this foam filled float. This floating drum is rotational molded with 0.15 in thick walls. Top quality virgin polyethylene with ultraviolet inhibitors guaranty sturdiness and long lasting use. This premium float can be used as replacement with existing docks or the key element to a brand-new dock. Whether you install it on a wood dock or an aluminum or steel structure, the heavy-duty fabrication of this float will resist the saltwater, sun, oil and gas spills, hence our 15 year limited warranty. These floats are filled with closed-cell expanded polystyrene (EPS).

Made of polyethylene with a black finish, measuring 0.15 in thick, with buoyancy rating 380 lb.

• This 24 in W x 48 in L x 12 in H foam filled float allows to chose from 8 slot locations on the extra thick 1-3/4 in heavy-duty mounting flange, allowing unlimited positioning on any dock structure
• Floats are to be installed with bolts or lag bolts and large flat washers (not included) underneath the frame so both lumber and dock hardware stay out of the water
• Polyethylene is environmentally friendly and resistant to aquatic wildlife such as muskrats, otters and beavers and gazoline
• Manufactured in the United States by Hendren Plastics, Eagle Floats exceed all the Marine Industry standards for encapsulated dock flotation using cutting edge technology, Infrared telemetry-computer controlled steaming
• One piece rotational seamless construction; the mounting holes are molded" Required installation hardware (not included), 3/8 in lag screws or hex bolts with 1.75 in large flat washers. Usually, 4 fasteners are enough to secure the float
• Calculate 380 lb of buoyancy per float to evaluate your needs based on our how to build guide available for download on this web page
• Use 380 lb buoyancy per float to evaluate your needs based on our how to build guide available for download on this web page
• Required mounting hardware (not included), 3/8 in lag screws or hex bolts with 2 in large flat washers, usually, 4 fasteners are enough to secure the float