
Street Pipe Elbow, 1/2 in, FIP x MIP, 90 deg Angle, Brass, Rough, 200 psi Pressure
1587 First Ave11
Paint shop3
In stock todaySame-day Manhattan
$9.99$12.00per each
Quantity
One-piece construction. Use with brass or steel pipe. All pipe threads are "American standard taper pipe threads." fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
| Angle | 90 deg |
|---|---|
| Connection Type | FIP x MIP |
| Finish | Rough |
| Material | Brass |
| Nominal Size | 1/4 in |
| Operating Temperature | 150 deg F |
| Pressure Rating | 200 psi |
| Suitable for | Brass and Steel Pipes |
| Weight | 0.11 lb |
| Length (shipping) | 8 in |
| Width (shipping) | 8 in |
| Height (shipping) | 4 in |
| Sold as | Sold by the ea |
| Factory pack | 25 |
| Country of origin | CN |
| Shipping dimensions | 8 in long by 8 in wide by 4 in high |
One-piece construction. Use with brass or steel pipe. All pipe threads are "American standard taper pipe threads." fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Made of brass with a rough finish, in 1/4 in, with angle 90 deg, connection type FIP x MIP, operating temperature 150 deg F.
For potable water





